Auto Paint SHERWIN WILLIAMS FC710 GAL Finish1 Ultimate Spot Panel CLEAR COAT KIT

  • Sale
  • $ 94.95

You will receive 1 gal of FC710 and 1 qt of FH611  Any questions please e-mail or call Cliffs Auto Parts at 1-800-287-6152 . 8 AM TO 6 PM  Monday - Friday  Saturday 9 AM TO 4 PM  Cliffs Auto Parts 4727 Conowingo RD Darlington MD 21034 . Shipping is in continental US 
FC710 is a 4.23 VOC high solids, urethane clearcoat designed for spot and multi panel repairs. This clearcoat works well in air dry or force dry environments and provide excellent gloss, DOI, leveling, blending, and buffing characteristics

Due to the High VOC limits for California Maryland Delaware, check your location regulations to verify it can be used in your area. 
  • 1 Gallon
  • Mix 4:1 with hardener
  • Made in the USA
FC710 can be applied over Basecoats or cured Single-Stage Enamels

  • Apply 2 coats, allowing each coat to flash to hand-slick between coats or a wet-on-wet “limited flash” application can be used allowing a 2-5 minute flash between coats.
  • Adjust air pressure to: HVLP 8 - 10 psi, Conventional 50 – 60 psi
  • Basecoat: 10-15 minutes
  • Single-Stage Enamels: 8 hours to overnight dry
  • Clearcoat: Allow FC710 clearcoat to dry overnight, then scuff with 1000 grit and reapply clearcoat

Air Dry Times at 70°F
  • Dust Free: 15 minutes 
  • To Deliver: 4-6 hours
  • Force Dry: 15 minutes @120°F surface temperature
If necessary, after 24 hours air dry, or cool down from force dry, sand with 1500 or finer grit paper and buff with the appropriate compound. Buffing is easiest when done within the first 48 hours following application.