Auto Paint SHERWIN WILLIAMS FC720 GAL Finish 1 Ultimate Overall CLEAR COAT KIT (Copy)

  • Sale
  • $ 119.95


You will receive 1 gal of FC720 and 1 qt of FH612  Any questions please e-mail or call Cliffs Auto Parts at 1-800-287-6152 . 8 AM TO 6 PM  Monday - Friday  Saturday 9 AM TO 4 PM  Cliffs Auto Parts 4727 Conowingo RD Darlington MD 21034 . Shipping is in continental US
 
FC720 is a 4.29 VOC high solids, urethane clearcoat designed for overall refinishing. This clearcoat works well in air dry or force dry environments and provide excellent gloss, DOI, leveling, blending, and buffing characteristics
 
NOT FOR SALE TO CALIFORNIA MARYLAND DELAWARE  RESIDENCE
Due to the High VOC limits for California Maryland Delaware, check your location regulations to verify it can be used in your area. 
  • 1 Gallon
  • Mix 4:1 with hardener
  • Made in the USA
Substrates:
FC720 can be applied over Basecoats or cured Single-Stage Enamels
 
Application:
  • Apply 2 coats, allowing each coat to flash to hand-slick between coats or a wet-on-wet “limited flash” application can be used allowing a 2-5 minute flash between coats.
  • Adjust air pressure to: HVLP 8 - 10 psi, Conventional 50 – 60 psi
ReCoat
  • Basecoat: 10-15 minutes
  • Single-Stage Enamels: 8 hours to overnight dry
  • Clearcoat: Allow FC720 clearcoat to dry overnight, then scuff with 1000 grit and reapply clearcoat
Drying:
 
Air Dry Times at 70°F
  • Dust Free: 40-45 minutes 
  • To Deliver: 8 hours
  • Force Dry: 30 minutes @120°F surface temperature
Buffing:
If necessary, after 24 hours air dry, or cool down from force dry, sand with 1500 or finer grit paper and buff with the appropriate compound. Buffing is easiest when done within the first 48 hours following applicat