SLOW SOLIDS URETHANE CLEARCOAT 4:1
An economical urethane clear formulated for spot, panel and overall repair. It’s easy to spray and apply and will produce a high gloss fast dry finish with easy buffing that will perform with water based and solvent based basecoat systems.MIXING DIRECTIONS: Ratio: 4:1 4 parts of 12370 Clearcoat: 1 part of Activator 12372 (slow) or 12374 (medium) or 12376 (fast). Stir thoroughly between each addition. Strain before spraying material. DIRECTIONS FOR USE: All drying times refer to shop temperature of 68°F (20°C) / 50% humidity. Allow additional drying time when optimal conditions are not reached. SPRAY GUN AND PRESSURE: Gun Type Tip Air Pressure Siphon Feed 1.4-1.6mm 35-45 psi Gravity Feed 1.2-1.6mm 25-40 psi HVLP 1.2-1.6mm 10 psi Apply 2 full wet coats allowing 10 to 15 minutes flash time between coats or as conditions dictate. Caution: Do not apply over non catalyzed acrylic or synthetic enamels or acrylic lacquer finishes. DRYING TIMES: Flash: 10 to 15 minutes Sanding: 3 to 6 hours Buffing: 3 to 6 hours To Deliver: 3 to 4 hours FORCE DRYING: Let the last coat flash for 20 minutes before baking. Bake at 140ºF (60ºC) for 40 minutes. Clearcoat maybe wet sanded and buffed after 1 hour cool down time.